Block Pot

I made a block pot in the shape of a rainbow and glazed it four different colors:

The inside of my block pot:

Techniques I used: I used shells,necklace,bracelet, and a toy castle to stamp onto the block pot. 

For glazing, I dipped all the different colors: Turquoise, Yellow, Chrome Green, and Maroon.

Slab Construction

For my 10 Inch requirement. I made a slab. I started out with a flat clay and had to make the clay leather hard then I cut out a board shaped into a t-shirt. 

I decorated it with leaves, shell, and a pearl necklace.

THE FINAL OUTCOME OF MY 10INCH SLAB CONSTRUCTION:

Techniques I used:  I made 3 T-shirt slab to make 3 sides. I also created buttons to make the T-shirt more realistic. 

For glazing, I used 3 different colors which is Turquoise,Maroon, and Yellow. I brushed all 3 sides and overlapped it at least 5 times.

Tea pot

First, I was making a teapot out of coils.

After stacking up the coils. I created a pattern where I created a water effect going around the teapot, So I smudged it and the other pattern was the coil.

MY TEAPOT WITH FIVE TEACUPS: My teacups are made out of coil to match my teapot's pattern.

THE FINAL OUTCOME OF MY TEAPOT:

Techniques I used: I used coils to create my whole teapot and teacups. 

For glazing, I used two different kinds of blue. I first dipped my teapot then as for the coils that shows in my teapot I brushed another color of blue. For my teacups, I brushed all of it.

Two Pinch Pot Combine

Made two pinch pots then connected them together. Then designed it by putting coils shaped as a flower.

The final outcome after being glazed:

Techniques I used: I used two pinch pot then combined it together. As for the top layer, I used coils. And for the flower, I used coils as well.

For glazing, I first dipped the whole thing in the color Maroon. Then I waxed all the flowers. Next I dipped it in the color Blue Green.

First Pinch Pot

Me working on wet clay. I started with a baseball size clay.

From a baseball size to a plate that resembles the Sun.

THE FINAL OUTCOME OF MY FIRST PINCH POT:

Techniques I used: I just used a baseball size clay then shaped it into a plate. Next I added a design where the edges are pointed.

For glazing, I first dipped the whole pinch pot in the color Yellow. Next I brushed the middle of the pinch pot using the color maroon and also brushed the pointed areas maroon. Therefore, the pinch pot looks like a sun.